One handed, heat and roll, the Hot Shot Big Easy! A standard heat gun mounts to the framework above the roller making this tool a valuable asset to the professional installers tool kit. The heat radiated at 1000 degrees from the heat gun will warm the vinyl to a perfect installation temperature the entire width of the 7.5" roller cutting down installation time and assuring a clean professional installation. The one-handed operation of the tool makes any job easier. Three easy adjustment settings on the Hot Shot Big Easy allows the heat gun to be placed further or closer to the substrate and the roller with the enclosed allen wrenches.
Like the original Big Easy, the Hot Shot Big Easy is a multi use hand held mounter installer that offers an impressive 7.5" roller width on a solid aluminum core axle which won't bend or flex while applying pressure across the full width of the roller. Very little effort or pressure is needed to lay vinyl with this tool. Made from T-6 aircraft grade aluminum for strength, with all stainless steel hardware, it's like having a portable manual mounter when installing on large trucks and trailers as well as various exterior and interior textured walls, floors, counters and other substrates.
The Hot Shot Big Easy is designed to hold either one heat gun in the middle, or two heat guns, one on each side. Use of two heat guns will give you a wider span of vinyl adhesion with each pass.
Heat Gun Not Included.
It is advised that installers use gloves when using this tool.
» View Instructions
US PATENT #9,597,863
